top of page
Writer's pictureBIKERS CLUB ® BLOGS

POLYTRON - Ultra Performance

BIKERS CLUB ® RECOMMENDS - POLYTRON for to increase your vehicle's performance and mileage by 30%. Tried and tested by our biker members.



INTRODUCTION:-


POLYTRON Metal Treatment Concentrate (MTC) is the best in the industry; unmatched outstanding performance. Add to your favorite lubricant and you will have the protection you can count on.


POLYTRON is attracted to metal surfaces and through metallurgical process forms (from the original metal) a durable polished-like micro-layer of metal that drastically resists wear up to 95%, extreme pressure, and excessive temperature. POLYTRON will increase the reliability, longevity, efficiency, power, and eliminate wear on your equipment. Even in an event of sudden oil/coolant loss, POLYTRON can temporarily protect the engine from catastrophic damages. Simply add 10% by volume to your main lubricant.


Polytron MTC KEY BENEFITS:-


  • Eliminate up to 90-95% of engine and equipment wear

  • Eliminate up to 85-90% of friction in sliding surfaces

  • Reduce engine/equipment operating temperature and noise level

  • Eliminate build-up and keep engine completely clean from new deposits

  • In the event of oil or coolant loss, engines are protected for tens of miles under any driving conditions

  • Restore compression (the compression may go up even in new cars)

  • Restore power, torque, and fuel economy (MPG)

  • Contribute to much cleaner emission gases, especially EPA-Approved Polytron Fuel Conditioner (GDFC) is used (95% chance of passing smog if you failed once)**

  • Are very effective in severe operating conditions such as dust, dirt and moisture. Perfect for customers in severe weather regions (ocean, cold winter states, and dry desserts)

  • Extend oil change intervals and oil filter life up to 4-7 times***

  • Extend service life of Engine by 6-9times

  • Extend service life of Automatic Transmission by 7-9 times

  • Contribute to considerable fuel and oil economy

  • Generate the same outstanding results, when used in transmissions, power steering, differentials or any other equipment

  • Contribute to reduction of up to 60% of maintenance costs

  • And much, much more!

**Results may vary. We strongly suggest performing oil change and maintenance per manufacturer's recommendation.


From machine shops to power plants, military tanks to passenger cars, Polytron's solid track record supports the truly amazing benefits made available to those who uses Polytron. Whether you're a car owner looking to increase performance (horsepower, torque, and response), reliability, and fuel mileage (MPG), or you run a business in logistics, mining, heavy equipment, production, passenger transportation industry and seeking to reduce maintenance and fuel cost, Polytron is the ONLY REAL solution.


Polytron will not cause any harm or damage to your equipment or vehicle: it contains no solids (PTFE – Teflon, MoS2 – Molybdenum Disulphide, Zinc, Lead, etc.), or harmful chemicals (corrosive cleansers, compound modifiers, oil thickeners, etc.) that MOST other competitors rely on to give you short term gain while risking for problems down the road.


Since Polytron Metal Treatment Concentrate (MTC) is polarized, it is attracted to metal surfaces and through proprietary metallurgical process transforms this surface into a durable polished-like micro-layer of metal that drastically resists wear, extreme pressure, and excessive temperature. Metal surfaces remain treated at ALL TIMES, which provide immediate start-up lubrication. Friction is substantially reduced and wear is eliminated up to 90%, which results in maximum equipment life, performance, and oil and fuel economy. Polytron MTC contributes to reduction in noise level and lowering of operating temperature.


Polytron MTC APPLICATIONS:-


  • Passenger cars, motorcycles, SUVs, trucks, railroad, marine vessels, fleet vehicles, diesel trucks, etc.

  • Automatic and manual transmission, differentials, steering pumps, gearboxes, etc.

  • Forklifts, gas powered generators, lawnmower, chainsaws, water pumps, etc.

  • Bearings and bearing journals (NOT suited for silver bearings)

  • Air compressors, machine shops equipment, shop tools, etc.

  • Mining and drilling equipment, farming equipment, hydraulic systems in construction, heavy machinery, etc.


DIRECTIONS:-

  • In Petrol or Diesel engines, add 10% of sump capacity. If used for the first time, apply it at least 200 KMS before the next oil change, and then apply it again in the next oil change. If oil change intervals are as per the car manufacturer's instructions, apply Polytron MTC every other oil change. In extended oil change intervals, (20,000 to 50,000 KMS) add Polytron MTC every oil change. Please perform Used Oil Analysis to determine feasibility of your engine before continuing with extended oil change intervals.

  • Motor Oil: add 10%

  • Automatic Transmission Fluid: add 3%

  • Manual Transmission Fluid: add 5%

  • Hydraulic Systems: add 5%

  • Gear Boxes: add 10%

  • Bearing Journals: add 10%

Note: All are in % by volume.



POLYTRON GDFC – FUEL CONDITIONER




INTRODUCTION:-


POLYTRON Gasoline-Diesel Fuel Conditioner (GDFC) will help you save fuel, equipment life, and cleans emissions, while giving you more power and torque. Up to 35% mpg improvement never came this easy! Mix ratio of only 0.1% by volume.


Polytron GDFC is today's most technologically advanced, EPA-Registered, fuel conditioner, scientifically designed for much cleaner and more efficient fuel combustion. It also cleans and lubricates the working parts of the fuel system and the upper part of the engine. Polytron GDFC dissolves and removes carbon deposits and prevents future harmful carbon build-up. Polytron GDFC improves mileage, up to 35+%, and overall engine performance. Polytron GDFC cleans the entire fuel system, including injectors, intake valves, ports, valve seats and combustion chamber. When used regularly, exhaust pollutants are reduced considerably, up to 60%. Polytron GDFC extends the effective life of diesel fuel held in storage tanks and can be used with any gasoline or diesel fuel.


Product Description:-

Polytron Ultra Performance Gasoline/Diesel Fuel Conditioner (GDFC) is scientifically designed for much cleaner and more efficient fuel combustion. It also cleans and lubricates the working parts of the fuel system and the upper part of the engine. POLYTRON GDFC dissolves and removes carbon deposits and prevents future harmful build-up. POLYTRON GDFC improves mileage and overall engine performance. POLYTRON GDFC Fuel Conditioner cleans the entire fuel system, including injectors, intake valves, ports, valve seats and combustion chamber. When used regularly, exhaust pollutants are reduced considerably. POLYTRON GDFC Fuel Conditioner extends the effective life of diesel fuel held in storage tanks and can be used with any gasoline or diesel fuel.


Main Characteristics

  • Maximizes mileage & performance

  • Maximizes power & compression

  • Cleans entire fuel system including injectors, intake valves, ports, valve seats and combustion chamber. – Provides quicker starting in cold weather.

  • Removes water in fuel tank and lines.

  • Neutralizes poor quality fuel

  • It is fully compatible with diesel and gasoline fuels and fuel oils.

  • Restore power, torque, and fuel economy (MPG)

Fuel Conditioner Key Benefits

  • Maximizes fuel mileage (mpg) by up to 35+%

  • Maximizes power & compression

  • Contributes to much cleaner emissions

  • Reduce emission by up to60%

  • 95% chance to pass smog test, if failed once

  • Cleans entire fuel system including injectors, intake valves, ports, valve seats and combustion chamber

  • Provides quicker starting in cold weather

  • Lubricates moving parts of combustion system

  • Removes water in fuel tank and lines

  • Neutralizes poor quality fuel

  • Fully Compatible with diesel and gasoline fuels and fuel oils


*95% passing rate on smog test for Polytron user is real, however, buyer understands Polytron/we will not guarantee this statement.


Fuel Conditioner Applications

  • Passenger cars

  • SUVs and pickup trucks

  • Heavy duty trucks

  • Tractors

  • Irrigation systems

  • Pumps

  • Oil field equipment

  • Marine vessels

  • Railroad

AND MANY MORE applications


Directions

  • Add 1 ml./litre for any fuel (petrol/diesel)


NOTE:-


POLYTRON is marketed by MANAALII IMPEX in INDIA

Contact details are: +91 9512810053


235 views0 comments

Recent Posts

See All

Comments


bottom of page